High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes plenty of energy. For example, there are tons of difficulties with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even if hotel desk refuses to provide more than one card to a guest, she/he might claim to have lost the card.
The standard old technology of hotel card switch. Additionally there is a lot of over usage of lights and AC energy due to things running even though guests aren’t in their rooms, and this can cause a monetary loss for the owner. Of course, no hotel owner wants to prohibit guests from using a comfortable stay, nor do owners expect guests to get in a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the legal right to fulfill their interests.
Some hotel owners think when they separate the AC through the main network, less energy will likely be consumed, while others believe that motion sensors would be the solution. However, these approaches fail to resolve the situation. The AC is regarded as the energy-consuming device of all, and motion sensors can be nightmares because they only function according to movement detection, which means the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company provides the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has numerous options, together with a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters suitable for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new way for hotel economical technology. By installing this door sensor in the entrance to some room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is completely resolved.
The following logics can be defined with this sensor to manage room energy with no discomfort for guests:
Logic 1: When there is any movement within the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will switch on for starters minute to ascertain if there is certainly movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This really is valuable in situations whenever a guest enters the room briefly. In energy-saving mode all lights are off aside from a nightlight, which stays on for three hours just in case there exists another guest having a nap. Also, the AC is definitely not switched off, nonetheless its temperature is going to be decreased by 2 degrees. This can help save energy over time.
Logic 3: When the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC will likely be switched off automatically. Additionally it is possible to define lower temperature levels for the AC. Furthermore, the vitality Servant can turn the AC on/off if this understands that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The lighting harvest sensor helps save energy by wscgid balcony lights off if you have enough sun light.
Another practical and beneficial ability of this sensor is its built in thermostat, which helps maintain the right temperature all the time. This is very important for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for a long period, humidity and bad smells will never be a problem within the room. This sensor can be designed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This can happen several times during the day if needed. A similar performance may be programmed in cold spots to prevent mold.
Another option with this smart system is TV control. In the event the hotel offers the guest with a room tablet, she/he has the capacity to control the room’s TV with it. This sensor was placed in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and requires with just a couple items and then in probably the most energy efficient way possible. For more information or even to plan a consultation, give us a call at www.tiscontrol.com